Activating Malicious Call Trace - 3Com VCX Manual

46 C 4: B
HAPTER ASIC
Activating
Malicious Call Trace
T O
ELEPHONE PERATION
To activate Do Not Disturb:
1 Press the Do Not Disturb Access button on the telephone. The red light
is lit next to the Do Not Disturb button.
Your telephone is now in Do Not Disturb mode. The display panel shows
DND.
2 To disable Do Not Disturb mode, repeat step 1. The DND message
disappears from the display panel and the red light goes out.
The Malicious Call Trace feature enables you to notify the system if you
receive a harassing or abusive call. The calling party can be from either an
external or internal source.
Malicious Call Trace cannot be invoked when you are on a conference
call.
To activate malicious call tracing during a call, press Feature + 119.
The Display Panel shows
The results of tracing a malicious call include the following actions:
Notification is sent to your network manager.
■
The log for the call includes a malicious call identifier.
■
For external malicious calls, the VCX system sends a message to the
■
authorities configured by your administrator to receive these reports.
Once you use the Malicious Call Trace feature code during a call, you
cannot revoke it.
for 5 seconds.
malicious call