3Com VCX Manual page 113

Table 9 Possible Problems (continued)
Possible Problem
On my VCX Business
Telephone, all incoming
internal calls come over my
speaker phone.
My telephone is not
forwarding my incoming
calls to my voice mailbox.
On my VCX Business
Telephone, I added a
One-Touch speed dial, but
the telephone does not dial
that number.
My telephone keeps
ringing after I pick up the
handset.
The display panel shows
"Wait for NCP."
Troubleshooting Problems
Suggested Solutions
You have the Hands Free feature enabled. For details,
Using the Hands Free Feature
see
Verify that you have activated the Forward to Voice
Mail feature. For details, see
Mail.
Verify that you have correctly set up speed dialing. For
Speed Dialing
details, see
Your telephone may have lost connection to the
■
system immediately after a call came in. Remove the
Ethernet cord from the jack, then re-insert it into
the wall jack.
Wait a few seconds. If the telephone continues to
■
ring, disconnect the electrical power for your
telephone, and then plug it back in.
Your telephone may be disconnected from the system.
Hang up your telephone and wait a few seconds. Then
pick up the handset. If the message still appears on
your telephone display panel, contact your
administrator.
113
.
Forwarding Calls to Voice
.