4-5. Connecting XR Edge, XR-A Gun, XR-A Python, Or XR - AlumaPro
.
Be sure to trim liner to proper extension.
3/32 in.
(2.4 mm)
2
3
Millermatic 350
5
1
.
1
2
3
Trim excess liner from end of gun
so no more than 3/32 in. (2.4 mm) of
liner extends past wire outlet guide.
4
Loosen securing knob. Insert gun
end through opening until it bottoms
against drive assembly (make sure
gun end does not touch drive rolls).
Tighten knob.
Be sure to change drive rolls to the
proper size and type.
5
Insert plug into receptacle, and
tighten threaded collar.
4
803 569-C / Ref. 803 570 -C / Ref. 803 540-D / Ref. 803 463
XR Edge guns prior to serial no.
LE079101 require an adapter
cord (part no. 195 498).
Gun End
Gun Liner
Wire Outlet Guide
Gun Securing Knob
Gun Trigger Plug
TM-1327 Page 11