System Reset - Miller Millermatic 350P Technical Manual

6-8. System Reset

.
Accessing the System Reset function will also allow access to Timer Reset (
and Option Reset (
for use by factory authorized service personnel only.
Do not use the timer reset or option reset functions if they appear on the displays.
1
A system reset function is available that
completely resets unit back to all the
original factory settings.
To access this menu, turn on welding power
source, then press the SETUP (1) button
when the SETUP light illuminates under the
Left display.
TM-1327 Page 34
ORST
) functions. The timer reset and option reset functions are
SRST
will appear on the left display and
will appear on the right display.
To prepare the unit for system reset, rotate
ON
right knob until appears on the right
display.
RTMR
)
OFF
To apply the system reset function, press
SETUP (1) button, and wait until unit
completely reboots before performing any
other operations.
Ref. 213 935-A
Millermatic 350