Installing Welding Gun - Miller Millermatic 350P Technical Manual

4-3. Installing Welding Gun

Millermatic 350
2 3
1
1 Drive Assembly
2 Gun Securing Knob
3 Gun End
Loosen securing knob. Insert gun
end through opening until it bottoms
against drive assembly (make sure
gun end does not touch drive rolls).
Tighten knob.
4 Gun Trigger Plug
Insert plug into receptacle, and
tighten threaded collar.
Close door.
4
Ref. 803 544-C / Ref. 803 541-C
TM-1327 Page 9