Section 2 − Introduction; Serial Number And Rating Label Location; Selecting A Location - Miller Millermatic 350P Technical Manual

2-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located on back. Use rating label to determine input power requirements and/or rated output.
For future reference, write serial number in space provided on back cover of this manual.

2-2. Selecting A Location

Movement
Location And Airflow
18 in
(460 mm)
Millermatic 350
SECTION 2 − INTRODUCTION
!
Do not move or operate
unit where it could tip.
1 Line Disconnect Device
Locate unit near correct input power
supply.
!
Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
1
18 in
(460 mm)
Ref. 803 543-E
TM-1327 Page 3