5-17. Connecting XR-Aluma-Pro Or XR-Aluma-Pro-Lite
philips head
wrench
nutdriver
wirecutter
1 Gun End
2 Gun Liner
3 Wire Outlet Guide
Trim excess liner from end of gun so no
more than 3/32 in. (2.4 mm) of liner extends
past wire outlet guide
greasegun
file
�
Complete Parts List is available at www.MillerWelds.com
3/32 in.
(2.4 mm)
2
3
crescent wrench
chippinghammer
frontcutter
4 Gun Securing Knob
Loosen securing knob. Insert gun end
through opening until it bottoms against
drive assembly (make sure gun end does
not touch drive rolls). Tighten knob.
filterwrench
paintbrush
803463 / 282952A
5
4
Be sure to change drive rolls to the proper
size and type.
5 Gun Trigger Plug
Insert plug into receptacle, and tighten
threaded collar.
1
OM-278174 Page 31