Identifying And Testing A Loudspeaker Amplifier When Using Informacast 4.0 Or Later - CyberData 011116 Operation Manual

Singlewire-enabled voip v2 loudspeaker amplifier (poe)

Hide thumbs Also See for 011116:

Table of Contents

2.4 Identifying and Testing a Loudspeaker Amplifier when

Using InformaCast 4.0 or Later

This section describes the basic process for identifying and testing the CyberData Loudspeaker

Amplifier when using Singlewire's InformaCast software version 4.0 or later.

Note

To add the Loudspeaker Amplifier to the InformaCast server:

1. Click Edit IP Speakers on the Main Screen of the Singlewire Informacast Server Web

Operations Guide

Identifying and Testing a Loudspeaker Amplifier when Using InformaCast 4.0 or Later

If you have questions or need help, please consult your InformaCast documentation and or

contact the CyberData support team.

CyberData's support is limited to IP endpoint functionality when used with an InformaCast

system.

Interface.

Figure 2-20. Main Screen of the Singlewire InformaCast Server Web Interface

Edit IP Speakers

930377F

Installing the VoIP V2 Loudspeaker Amplifier

CyberData Corporation

Table of Contents

Do you have a question about the 011116 and is the answer not in the manual?