Configure The Loudspeaker Amplifier Parameters - CyberData 011116 Operation Manual

2.3 Configure the Loudspeaker Amplifier Parameters

To configure the Loudspeaker Amplifier online, use a standard web browser.
Configure each Loudspeaker Amplifier and verify its operation
ready to mount a Loudspeaker Amplifier enclosure, refer to
for instructions.
All Loudspeaker Amplifier are initially configured with the default IP settings indicated 
in Table
When configuring more than one Loudspeaker Amplifier, attach the Loudspeaker Amplifiers to the
network one at a time to avoid IP address conflicts.
IP Addressing
IP Address
Web Access Username
Web Access Password
Subnet Mask
Default Gateway
Operations Guide
2-8.
Parameter
a
a
a
a. Default if there is not a DHCP server present.
Configure the Loudspeaker Amplifier Parameters
Table 2-8. Factory Default Settings
DHCP
10.10.10.10
admin
admin
255.0.0.0
10.0.0.1
930377F
Installing the VoIP V2 Loudspeaker Amplifier
before
you mount it. When you are
Appendix A, "Mounting the Amplifier"
Factory Default Setting
CyberData Corporation
17
