Installing The 10Gbe Mezzanine Card; Mezzanine-Card Bridge Board; Removing The Mezzanine-Card Bridge Board - Dell PowerEdge C6320 Owner's Manual

Installing the 10GbE mezzanine card

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Attach the 10 GbE mezzanine card to the bracket by aligning the four ports to the corresponding
port slots on the bracket.
2. Install the screws to secure the 10GbE mezzanine card to the bracket.
3. Install the 10 GbE mezzanine card assembly to the card bridge board on the system-board assembly.
4. Install the screws to secure the 10 GbE mezzanine card assembly to the system-board assembly.
5. Place the expansion-card bracket into the system-board assembly.
6. Replace the screws that secure the expansion-card bracket.
7. Reconnect all the cables to the 10 GbE mezzanine card.
8. Replace the system-board assembly.
NOTE: For more information about setting VLAN in VMware for 10 GbE mezzanine card, see
VMware* vSphere ESX 5.x iSCSI Boot Support with
Related Information
Installing a system-board assembly

Mezzanine-card bridge board

Removing the mezzanine-card bridge board

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. It is recommended to turn off the system, including any attached peripherals, and disconnect the
system from its electrical outlet.
2. Remove the system-board assembly.
3. Remove the mezzanine card.
4. Pull the mezzanine-card bridge board away from the mezzanine slot on the system board.
84
VLANs.