Removing The Lsi 2008 Sas Optional Mezzanine Card - Dell PowerEdge C6320 Owner's Manual

3. Dual Port 10GbE
4. Single port FDR
5. Dual Port SFP+

Removing the LSI 2008 SAS optional mezzanine card

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: The LSI 2008 SAS mezzanine card is seated in PCI-E Gen3 x8 mezzanine slot 3 on the
system board, which is not active in 1-processor configuration. See
connectors.
1. Remove the system-board assembly.
2. Disconnect all the cables from the mezzanine card.
3. Remove the three screws that secure the LSI 2008 SAS mezzanine card.
4. Lift the mezzanine card out of the system-board assembly.
Figure 46. Removing and installing the LSI 2008 SAS mezzanine card
1. screw (3)
3. card bridge card
C6320 system board
2. LSI 2008 SAS mezzanine card
4. system-board assembly
77