Component
AC power indicator
Baseboard Management Controller (BMC) heart beat LED
The system board provides BMC heart beat LED (CR17) for BMC debugs. The BMC heart beat LED is
green. When the system AC power is connected, the LED lights. When BMC firmware is ready, the BMC
heart beat LED blinks.
Figure 15. BMC heart beat LED on the C6320 system board
1.
BMC heart beat LED
Documentation matrix
The documentation matrix provides information on documents that you can refer to for setting up and
managing your system.
To...
Install your system into a rack
Set up your system and know the system technical
specifications
Install the operating system
Indicator
Solid amber
Solid green
Blinking green
Off
Refer to...
Rack documentation included with your rack
solution
Getting Started With Your System that shipped with
your system or see Dell.com/poweredgemanuals
Operating system documentation at Dell.com/
operatingsystemmanuals
Condition
Standby mode with Fan Lock for
15 sec
Standby mode with OTP range
Active mode with +12VDC Fault
Active mode with Fan Lock for 15
sec
DC_OK (power good)
Standby mode normal
Unit without AC power
19