Installing A 3.5 Inch Hard-Drive Blank; Removing A 2.5 Inch Hard-Drive Blank - Dell PowerEdge C6320 Owner's Manual

Figure 20. Removing or installing a 3.5 inch hard-drive blank
1. 3.5 inch hard-drive blank

Installing a 3.5 inch hard-drive blank

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Slide the hard-drive blank into the drive bay until the hard-drive blank is seated in place.

Removing a 2.5 inch hard-drive blank

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: To maintain proper system cooling, all empty hard-drive bays must have drive blanks
installed.
NOTE: This section is applicable to systems with hot-swappable hard drives only.
Pull the handle to remove the 2.5 inch hard-drive blank out of the hard-drive bay.
50