Your Receiver; Default Pin: 1234; Front Panel; Rear Panel - Strong SRT 8108 User Manual

2.0 YouR RECEIvER

2.1 dEfAulT PIn: 1234

2.2 front Panel

1. mode indicator
2. IR sensor
3. uSb

2.3 Rear Panel

1. Rf In
2. Rf ouT
3. CoAXIAl
4. Audio R/l out
5. hdmI
6. Tv SCART
7. Power Cord

2.4 Remote Control

1. q
2. !
3. 5
4. 6
5. Pg+/Pg-
6. 7
7. 8
8. mEnu
9. EXIT
10. pq
11. tu
12. ok
4
REd indicates that the receiver is in STANDBY mode.
gREEn indicates that the receiver is in OPERATING mode.
Point your remote control towards this sensor.
Connector for USB storage devices.
To connect to your antenna for reception of broadcast signals.
To connect the terrestrial antenna signal to your TV set. This
connection will allow you to watch digital terrestrial programmes
depending on the tuner of your TV and local broadcast
conditions*
To connect your receiver to a digital home theatre, AV receiver or
digital audio amplifier.
To connect your receiver to an analogue audio amplifier.
To connect your receiver with your TV set using an HDMI cable.
To connect your receiver with your TV set using a SCART cable.
Your receiver requires a supply voltage of 220~240V AC
(Auto-selectable), 50/60Hz ±5%. Please ensure the local power
specification meets these requirements before connecting your
receiver to the wall outlet.
Turns the receiver On/Standby
Mutes audio output of the receiver
Fast rewind
Fast forward
Channel up/down in channel list mode
Jumps to previous item in playlist
Jump to next item in playlist
Opens the main menu, in menu you will get one step back
Exits from the menu or sub-menu
Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific Menus
Menu Off: Displays the current channel list
Confirmation of Menu Items.
PART 2 • English
Fig. 1
Fig. 2
Fig. 3