Language; System - Strong SRT 8108 User Manual

PART 2 • English
noTE:

7.7 language

This menu allows you to set several items for language and audio and change default settings to your
personal likings. Press tu to select Language and press ok. Press pq to highlight the submenu of
choice and press ok to select. Press EXIT or mEnu to get back to the main menu.
OSD Language:
Subtitle Language:
Subtitle Type
First Audio:
Second Audio:
Digital Audio:
*Availability of DVB/HoH subtitles depends on the broadcast. If such subtitles are not supported then most likely subtitles can be activated via Teletext
if available.
**Dolby and the double-D symbol are trademarks of Dolby Laboratories.

7.8 System

This menu allows you to set several items for system behaviour and maintenance. Press tu to select
System and press ok. Press pq to highlight the submenu of choice and press ok to select. Press
EXIT or mEnu to get back to the main menu.
7.8.1 Parental guidance
Press pq to select Parental Guidance from the System menu and press ok to proceed. You will be
asked to enter your PIN code. (dEfAulT PIn: 1234)
Age:
Set Password:
7.8.2 Restore factory default
This option allows you to reset the receiver to factory settings, which clears all stored channels. Press
pq to select Restore Factory Default in the System menu and press ok. You are asked to enter your
PIN code. Enter the correct PIN code using the 0~9 buttons. (dEfAulT PIn: 1234). A confirmation
question is displayed. Select ok to restart to factory settings or press EXIT to leave.
The bluE button on the remote control serves as a shortcut to the Timer
menu.
Press tu to select the language for the On Screen Display.
Press tu to select the preferred subtitle language.
Press tu to select the sort of subtitles you want to display for all channels by
default. 'Normal' subtitles or 'Hard of Hearing' for the hearing impaired. 'Off',
don't show subtitles.*
Press tu to select Audio language.
Press tu to select a language that will be played when the language
selected at First Audio isn't available.
Toggles between PCM and RAW HDMI (Bitstream) output. When PCM is
selected, all digital audio will be converted to stereo audio. RAW HDMI On
enables you to listen or transfer Dolby® Digital/Dolby® Digital Plus** audio
(Multi channel audio) to the TV via HDMI or Home entertainment system.
RAW HDMI Off will only transfer the raw bitstream to the S / PDIF connector.
Set to 'Off' will cut all digital audio on the S / PDIF.
Choose between: Off, 04 years and up to 18 years. Channels with a parental
rating equal or above the chosen age will be protected with a PIN code (if
available in your local broadcast.)
Enter your old PIN code (4 digits). Enter your new PIN. Re-enter your PIN code
to confirm. Press EXIT to leave the menu item.
13