Time - Strong SRT 8108 User Manual

Country Region:
Antenna Power:
Search Type
noTE

7.6 Time

This menu allows you to set several items for time and change default settings for your personal
situation. Press tu to select Time and press ok. Press pq to highlight the submenu of choice and
press ok to select. Press EXIT or mEnu to get back to the main menu.
Time Offset:
7.6.1 Timer
This menu allows you to set up to 30 timed events for recording or waking up the receiver. Press pq
to select Timer from the Time menu and press ok to enter. The receiver will display a list with max. 30
timers, followed by their respective status, if already set. Select the timer you wish to set or edit with
pq and press REd (Add) or gREEn (Edit) to proceed. The event menu will now be displayed.
The following settings are available:
Channel Type:
Channel No.:
Channel Name:
Start Date (D/M/Y):
Start Time:
End Time:
Repeat:
Mode:
When all settings are according to your wishes, press ok to confirm. To quit the timer without saving
your settings, press EXIT.
12
Defaults for frequency band plan, LCN and time zone are coupled to this
setting.
Some countries have more than one time zone, if applicable, you can change
the countries region and time zone.
IIf you use an (indoor) antenna, which requires a 5 V power supply, you can
set this option to 'On'. The Antenna-in connector will provide a 5 V 'phantom-
power' to the antenna. If a passive antenna is used, this option is best left 'Off.'
Select 'Free' to search and store only Free-to-Air (FTA) channels or select 'All' to
search and store encrypted channels as well.
Encrypted channels cannot be watched with this unit.
The time offset is best left to 'Auto' . The time will be kept by the broadcaster.
The time zone is set according to the country and region selected in the
Channel Search menu. If necessary, the Time Offset can be changed e.g. for
adapting to Daylight saving time, if the broadcaster should not cater for this.
Choose between TV or Radio.
Choose the channel number you want to record.
The channel name will change automatically according to the channel
number.
Use the 0~9 buttons to enter the date for the timed event.
Use the 0~9 buttons to enter the start time for the event.
Use the 0~9 buttons to enter the end time for the event.
Choose between Once, Daily (the timer will be executed every day at same
time) or Weekly (the timer will be executed every week, same day at the same
time.
Choose between View (the timer will wake up the receiver) or Record (the
timer will start to record the scheduled event).
PART 2 • English