Cleaning The Stapler - Kyocera Mita KM-3530 Service Manual

Hide thumbs Also See for KM-3530:

Table of Contents

(3) Cleaning the stapler

During periodic maintenance, remove all the staples remaining inside the machine due to failure of stapling.

1. Open the front and conveying covers of the

2. Remove the staple cartridge.

3. Remove the four screws securing the stapler

cover and then the cover.

4. Remove the staples attracted to the magnet

on the inside of the stapler cover.

5. Refit all the removed parts.

Stapler cover

Staple cartridge

Figure 1-4-3

Table of Contents