Paper Misfeed Detection Condition - Kyocera Mita KM-3530 Service Manual

3B5

(2) Paper misfeed detection condition

• Jam between the finisher and copier (jam code 81)
The paper conveying switch does not turn on within 1550 ms of the signal requesting paper ejection is output from the
copier.
• Intake jam (jam code 82)
During paper intake from the copier, the paper conveying switch (PCSW) does not turn off within 1960 to 3480 ms
(depending on paper size) of paper conveying switch (PCSW) turning on.
• Jam during paper conveying for batch ejection 1 (jam code 83)
When ejection a stack of paper, the paper conveying switch (PCSW) does not turn on within 1590 ms of the paper
conveying motor (PCM) turning on.
• Jam during paper conveying for batch ejection 2 (jam code 84)
When ejection a stack of paper, the paper conveying switch (PCSW) does not turn off within 2260 to 3190 ms (depending
on the paper size) of the paper conveying motor (PCM) turning on.
1-3-2
PCSW
PCM
PCSW
PCSW
1960 to 3480 ms
Timing chart 1-3-1
1590 ms
Timing chart 1-3-2
2260 to 3190 ms
Timing chart 1-3-3
Off
On
Off
On
Off
On
Off
On