Eject And Switchback Sections - Kyocera Mita KM-3530 Service Manual

2BH/J

2-1-8 Eject and switchback sections

The eject and switchback sections eject paper on which fixing has ended with the eject roller that is rotated by forward
rotation of the eject motor.
In duplex copying, paper is turned over by reverse rotation of the eject motor. When paper is transferred to the job
separator or the internal finisher, the feedshift solenoid (FSSOL) is turned on to activate the feedshift guide to switch the
paper transfer path.
2-1-20
Figure 2-1-24 Eject and switchback sections
FSSOL
FSSW
Figure 2-1-25 Eject and switchback sections block diagram
EM
ESW
MPCB
1 Feedshift guide
2 Eject roller
3 Eject pulley
4 Switchback roller
5 Switchback pulley
6 Eject switch (ESW)
7 Feedshift switch (FSSW)
8 Feedshift solenoid (FSSOL)