Paper Conveying Operation In Sort Mode - Kyocera Mita KM-3530 Service Manual

3B5

(1) Paper conveying operation in sort mode

When a copy is made in the sort mode, the feedshift solenoid (FSSOL) turns on and the feedshift guide of the copier
operates to switch the paper path to the paper conveying unit. After curling of the conveyed paper is eliminated by the curl
eliminator rollers, the paper is conveyed to the intermediate tray by the feedshift roller. When the trailing edge registration
cursor of the intermediate tray shifts the paper stocked in the intermediate tray to the stopper, the pickup solenoid (PUSOL)
turns on to lift the press roller and release the stopper. The stack of paper on the intermediate tray is ejected to the eject tray
by the feedshift roller and eject roller.
Feedshift guide
(FSSOL:ON)
To eject tray
2-1-2
Feedshift solenoid
Lower curl
eliminator roller
Small feedshift claw
Eject pulley
Eject roller
Feedshift pulley
Upper curl
eliminator
Feedshift roller
roller
Feedshift pulley
Feedshift claw
Stopper (PUSOL:ON)
Figure 2-1-3
To intermediate tray
Press roller
Stopper (PUSOL:OFF)
Pick up solenoid
Feedshift roller
Press roller