Draft Mode - Fuji Xerox DocuPrint CM225FW User Manual

• Quantity
Purpose:
To specify the number of copies to print.
Values:
1*
1–999
• Image Enhance
Purpose:
To specify whether to enable the Image Enhance feature, which makes the boundary line between black and white
smoother to decrease jagged edges and enhance the visual appearance.
Values:
Off
On*

• Draft Mode

Purpose:
To save toner by printing in the draft mode. The print quality is reduced when you print in the draft mode.
Values:
Disable*
Enable
• Line Termination
Purpose:
To add the line termination commands.
Values:
Off*
Add-LF
Add-CR
CR-XX
• Output Color
Purpose:
To specify the color mode to Color or Black & White. This setting is used for a print job that does not specify a
print mode.
Values:
Black & White
Color*
212 Using the Operator Panel Menus and Keypad
Sets the value in increments of 1.
Disables the Image Enhance feature.
Enables the Image Enhance feature.
Does not print in the draft mode.
Prints in the draft mode.
The line termination command is not added.
CR=CR, LF=LF, FF=FF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Prints in the black and white mode.
Prints in the color mode.