Fuji Xerox DocuPrint CM225FW User Manual page 54

10
Confirm that Setting WPS is displayed, and enter the PIN code displayed on step
wireless LAN access point.
NOTE:
• For details about the WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless
LAN access point.
When WPS is successful, wireless connection is established and setup for wireless LAN is complete.
• Auto SSID Setup
1
Press the (System) button.
2
Select the Tools tab.
3
Select Admin Settings.
4
Select Network.
5
Select Wireless.
6
Select Wireless Setup Wizard.
The printer automatically searches the access points on wireless network.
7
Select the desired access point.
If the desired access point does not appear, see
NOTE:
• Some hidden SSID may not be displayed. If the SSID is not detected turn on SSID broadcast from the access point.
8
Select Next.
9
Enter the passphrase or WEP key.
When the encryption type of the selected access point is WPA2 or Mixed in step 7:
Select the Enter Password text box, and then enter the passphrase.
a
Select OK.
b
When the encryption type of the selected access point is WEP in step 7:
Select the Enter Key text box, and then enter the WEP key.
a
Select OK.
b
NOTE:
• A passphrase is an encryption key for WPA and WPA2 encryption which consists of 8 to 63 alphanumeric (and 64
hexadecimal) characters. It may be described as a key on some access points or routers. For details, refer to the manual
supplied with the access point or router.
When the Auto SSID Setup is successful, wireless connection is established and setup for wireless LAN is
complete.
54 Printer Connection and Software Installation
"Manual SSID Setup" on page 55
8 into the web page of the
.