Entering Values - Fuji Xerox DocuPrint CM225FW User Manual

 Entering Values
Using the Operator Panel
1
Press the (System) button.
2
Select the Tools tab.
3
Select Admin Settings.
4
Select Maintenance.
5
Select Color Registration.
6
Select Enter Registration Values.
7
Confirm that LY, LM, and LC appear.
8
Select + or - to specify the values for LY, LM, and LC.
9
Select Next.
10
Confirm that RY, RM, and RC appear.
11
Select + or - to specify the values for RY, RM, and RC.
12
Select Next.
13
Confirm that Y, M, and C appear.
14
Select + or - to specify the values for Y, M, and C.
15
Select OK.
NOTE:
• The registration values are always shown as 0 the next time you enter the menu.
16
Select Print Registration Chart.
17
Select Print.
The color registration chart is printed with the new values.
If the straightest line is not at the value of 0, adjust the values again. Checking the charts before and after the
adjustments will help you to determine the values to enter.
IMPORTANT:
• After printing the color registration chart, do not turn off the printer until the printer motor has stopped running.
294 Troubleshooting