Fuji Xerox DocuPrint CM225FW User Manual page 308

Error Code
033-788
034-700
034-701
034-702
034-703
034-704
034-705
034-706
034-707
034-708
034-709
034-710
034-711
034-712
034-713
034-714
034-715
034-716
034-717
034-718
034-719
308 Troubleshooting
What You Can Do
Select OK to clear the message. Remove the received fax, or wait for a while until sending a fax is
completed.
Select OK to clear the message. If the error continues to appear after the redial for the specified
number of times, try the following:
• Check if the phone line is connected properly.
• Check if the destination number is correct.
• Set Number of Redial to the larger value.
• Set Interval Timer or Redial Delay longer.
See also:
• "Connecting the Telephone Line" on page 172
Select OK to clear the message. If the error continues to appear after the redial for the specified
number of times, try the following:
• Check if the phone line is connected properly.
• Check if the destination number is available and correct.
• Set Number of Redial to the larger value.
• Set Interval Timer or Redial Delay longer.
See also:
• "Connecting the Telephone Line" on page 172
Select OK to clear the message. If the error continues to appear after the redial for the specified
number of times, try the following:
• Set Number of Redial to the larger value.
• Set Interval Timer or Redial Delay longer.
• Lower Modem Speed.
Select OK to clear the message. If the error continues to appear after the redial for the specified
number of times, try the following:
• Set Number of Redial to the larger value.
• Set Interval Timer or Redial Delay longer.
• Check if the destination number is available.
• Lower Modem Speed.
Select OK to clear the message. If the error continues to appear after the redial for the specified
number of times, try the following:
• Set Number of Redial to the larger value.
• Set Interval Timer or Redial Delay longer.
Select OK to clear the message. If the error continues to appear after the redial for the specified
number of times, try the following:
• Set Number of Redial to the larger value.
• Set Interval Timer or Redial Delay longer.
• Lower Modem Speed.
Select OK to clear the message. If the error continues to appear after the redial for the specified
number of times, try the following:
• Set Number of Redial to the larger value.
• Set Interval Timer or Redial Delay longer.
• Check if the destination number is available.
Select OK to clear the message. If the error continues to appear after the redial for the specified
number of times, try the following:
• Set Number of Redial to the larger value.
• Set Interval Timer or Redial Delay longer.
• Lower Modem Speed.
Select OK to clear the message. If the error continues to appear after the retry for the specified
number of times, it will be canceled. When retrying sending the fax, lower Modem Speed.
Select OK to clear the message. If the error continues to appear after the retry for the specified
number of times, it will be canceled. Retry sending the fax.
Select OK to clear the message. If the error continues to appear after the retry for the specified
number of times, it will be canceled. When retrying sending the fax, lower Modem Speed.