Protrudent/Bumpy Paper - Fuji Xerox DocuPrint CM225FW User Manual

 Protrudent/Bumpy Paper
Problem
Printed surface got
protrudent/bumpy.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji Xerox local
representative office or an authorized dealer.
288 Troubleshooting
Action
Clean up the fusing unit.
1 Load one sheet of paper on the standard 150 sheet tray, and then print a solid
image all over the paper.
2 Load the printed sheet with the printed side facing down, and then print a blank
sheet of paper.