Fuji Xerox DocuPrint CM225FW User Manual page 71

Windows 8, Windows 8 64-bit Edition, Windows 8.1, Windows 8.1 64-bit Edition, Windows Server
2012, or Windows Server 2012 R2
1
On the Desktop screen, place the mouse pointer in the upper right corner of the screen and move the mouse
down, and then select Settings.
2
Click Control Panel
R2)  Devices and Printers.
3
Click Add a printer.
4
Select a printer or click The printer that I want isn't listed.
If you have selected your printer, go to step 7.
If you have clicked The printer that I want isn't listed, go to step 5.
5
Select Add a printer using a TCP/IP address or host name, and then click Next.
6
Select TCP/IP Device from Device type, and enter the IP address in the Hostname or IP address box, and
then click Next.
7
Click Have Disk to display the Install From Disk dialog box.
8
Click Browse, and then select the extracted setup information (.inf) file in "Getting the Driver File" on page 65.
9
Click Open.
10
Click OK.
11
Select your printer name, and then click Next.
12
To change the printer name, enter the printer name in the Printer name box, and then click Next.
Installation starts.
If the User Account Control dialog box appears, click Yes.
NOTE:
• If you are an administrator on the computer, click Yes; otherwise, contact your administrator to continue the desired
action.
13
If you do not want your printer shared, select Do not share this printer. Otherwise, select Share this printer
so that others on your network can find and use it.
14
Click Next.
15
To use this printer as the default printer, select the Set as the default printer check box.
16
Upon completion of the driver installation, click Print a test page to verify installation.
17
Click Finish.
 Hardware and Sound (Hardware for Windows Server 2012 and Windows Server 2012
Printer Connection and Software Installation 71