Assigning An Ip Address Manually - Fuji Xerox DocuPrint CM225FW User Manual

Using the CentreWare Internet Services
1
Launch your web browser.
2
Enter the IP address of the printer in the address bar, and then press the Enter key.
3
Select Properties.
4
Select TCP/IP from the Protocol Settings folder on the left navigation panel.
5
In the IP Address Mode field under IPv4, select the DHCP/AutoIP option.
6
Click Apply.
7
Click Reboot Machine to restart the printer.
 Assigning an IP Address Manually
NOTE:
• Assigning an IP address is considered as an advanced function and is normally performed by a system administrator.
• Depending on the address class, the range of the IP address assigned may be different. On Class A, for example, an IP
address in the range from 0.0.0.0 to 127.255.255.255 will be assigned. For assignment of IP addresses, contact your
system administrator.
You can assign the IP address by using the operator panel, the Printer Setting Utility, or the CentreWare Internet
Services.
For Windows, you can also assign the IP address to the printer using the installer on the Software Pack CD-ROM.
Using the Operator Panel
1
Press the (System) button.
2
Select the Tools tab.
3
Select Admin Settings.
4
Select Network.
5
Select Ethernet or Wireless.
6
Select TCP/IP.
7
Select Get IP Address.
8
Select Panel, and then select OK.
9
Confirm that Settings Become Effective After Restart. appears, and then select Close.
10
Select IP Address.
The cursor is located at the first digit of the IP address.
11
Enter the value of the IP address using the number pad.
12
Select .
The cursor moves to the next digit.
13
Repeat steps 11 to
14
Confirm that Settings Become Effective After Restart. appears, and then select Close.
15
Select Subnet Mask.
The cursor is located at the first digit of the subnet mask.
12 to set all digits in the IP address, and then select OK.
Printer Connection and Software Installation 57