Using The Id Card Copy - Fuji Xerox DocuPrint CM225FW User Manual

Using the ID Card Copy

NOTE:
• If the Service Lock setting for ID Card Copy is set to Locked, the ID Card Copy function is disabled and the menu is not
displayed on the screen. For details, see "Service Lock" on page 236.
You can copy both sides of an ID card on one side of a single sheet of paper in its original size by selecting ID Card
Copy on the touch panel. This feature helps to show both sides of an ID card in one page in its original size.
To make a copy:
1
Place an ID card facing down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the Document Glass" on page 128.
2
Press the (Services Home) button.
3
Select ID Card Copy.
4
Specify the copy settings below as required.
• Output Color
• Lighten / Darken
• Sharpness
• Auto Background Suppression
See also:
• "Setting Copy Options" on page 131
5
Press the (Start) button to start copying.
After the front side of the ID card is scanned, the display prompts you to turn over the card.
To scan the back side of the ID card, turn the ID card over and select Scan Side 2.
NOTE:
• Color copy is secured with a password if the Service Lock setting for Copy is set to Color Password Locked. If
you set Output Color to Full Color and the Service Lock setting for Copy to Color Password Locked, you
will need to enter the four digit password after pressing the (Start) button.
Copying 137