Fuji Xerox DocuPrint CM225FW User Manual page 216

Manual SSID SSID
Setup
Infrastructure Select to configure the wireless settings through the access point such as a
Ad-hoc
216 Using the Operator Panel Menus and Keypad
Specify a name to identify the wireless network. Up to 32 alphanumeric
characters can be entered.
wireless router.
Select to configure the wireless settings with no encryption
No Security
settings.
Select to configure the wireless settings with the Mixed
Mixed mode
mode PSK encryption. Mixed mode PSK automatically
PSK
selects the encryption type from either WPA-PSK-AES or
WPA2-PSK-AES.
Enter
Password
Select to configure the wireless settings with the WPA2-
WPA2-PSK-AES
PSK-AES encryption.
Enter
Password
Select to configure the wireless settings with the WEP
WEP
encryption.
Enter WEP Key Specify the WEP key to use through the
Transmit Key
Select to configure the wireless setting without the access point such as a
wireless router.
Select to configure the wireless settings with no encryption
No Security
settings.
Select to configure the wireless settings with the WEP
WEP
encryption.
Enter WEP Key Specify the WEP key to use through the
Transmit Key
Specify the passphrase of 8 to 63
alphanumeric (or 64 hexadecimal)
characters.
Specify the passphrase of 8 to 63
alphanumeric (or 64 hexadecimal)
characters.
wireless network. For 64bit keys, enter
10 hexadecimal characters. For 128bit
keys, enter 26 hexadecimal characters.
Select a transmit key from WEP Key 1,
WEP Key 2, WEP Key 3, and WEP Key
4.
wireless network. For 64bit keys, enter
10 hexadecimal characters. For 128bit
keys, enter 26 hexadecimal characters.
Select a transmit key from WEP Key 1,
WEP Key 2, WEP Key 3, and WEP Key
4.