• Form Line
Purpose:
To set the number of lines in a page.
Values:
64*
5-128
*
Factory default menu setting
NOTE:
•
The printer sets the amount of space between each line (vertical line spacing) based on the Form Line and
Image Orientation settings. Make sure that the Form Line and Image Orientation settings are
correct before changing the Form Line setting.
• Quantity
Purpose:
To set the default print quantity, within a range from 1 to 999. The default is 1. (Set the number of
copies required for a specific job on the print driver. Values selected on the print driver always override
values selected on the operator panel.)
• Image Enhancement
Purpose:
To specify whether to enable the Image Enhancement feature which makes the boundary line
between black and white smoother to decrease jagged edges and enhance the visual appearance.
Values:
Off*
On
*
Factory default menu setting
• Draft Mode
Purpose:
To save toner by printing in the draft mode. The print quality is reduced when you print in the draft
mode.
Values:
Disable*
Enable
*
Factory default menu setting
Select the value in increments of 1.
Disables the Image Enhancement feature.
Enables the Image Enhancement feature.
Does not print in the draft mode.
Prints in the draft mode.
Using the Operator Panel Menus
179