Hex Dump; Draft Mode - Fuji Xerox DocuPrint P355 d User Manual

• Quantity
Purpose:
To set the default print quantity, within the range of 1 to 999. The default is 1. (Set the number of copies required for
a specific job from the print driver. Values selected from the print driver always override values selected from the
operator panel.)

• Hex Dump

Purpose:
To help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is printed in
hexadecimal and character representation. Control codes are not executed.
Values:
*
Disable
Enable

• Draft Mode

Purpose:
To save toner by printing in the draft mode. The print quality is reduced when you print in the draft mode.
Values:
*
Disable
Enable
• LineTermination
Purpose:
To add the line termination commands.
Values:
*
Off
Add-LF
Add-CR
CR-XX
• Ignore FormFeed
Purpose:
To specify whether to ignore blank pages that only contain Form Feed control codes.
Values:
*
Off
On
Disables the Hex Dump feature.
Enables the Hex Dump feature.
Does not print in the draft mode.
Prints in the draft mode.
The line termination command is not added.
CR=CR, LF=LF, FF=FF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Disables the Ignore FormFeed feature.
Enables the Ignore FormFeed feature.
Using the Operator Panel Menus
155