Drpd Pattern - Fuji Xerox DocuPrint CM225FW User Manual

DRPD Pattern

Purpose:
To provide a separate number for faxing with a distinctive ring pattern.
Values:
Pattern1-7
Extel Hook Threshold
Purpose:
To select the external telephone hook detection threshold for the condition in which a telephone line is not being
used.
Values:
Lower
Normal*
Higher
222 Using the Operator Panel Menus and Keypad
DRPD is a service provided by some telephone companies. DRPD patterns are
specified by your telephone company. The patterns provided with your printer are
shown below:
Pattern1
Pattern2
Pattern3
Pattern4*
Pattern5
Pattern6
Pattern7
Ask your telephone company which pattern you need to select to use this service.
For example, Pattern7 is the New Zealand FaxAbility distinctive ringing pattern:
rings for 400 ms, stops for 800 ms, rings for 400 ms and stops for 1400 ms. This
pattern is repeated over and over again. This printer only responds to Distinctive
Alert cadence(s) DA4 in New Zealand.
Sets the external telephone hook detection threshold to Lower.
Sets the external telephone hook detection threshold to Normal.
Sets the external telephone hook detection threshold to Higher.