Fuji Xerox DocuPrint CM225FW User Manual page 99

To prevent DL and Monarch from being wrinkled, they are recommended to be loaded with the flaps opened. Place
the print side facing up, and the flaps come at the bottom when you face towards the printer.
NOTE:
• When you load the envelopes in the long-edge feed (LEF) orientation, be sure to specify the landscape orientation on the print
driver.
• When Loading C5
Load envelopes with the flaps opened. Place the print side facing up, and the flaps come at the bottom when you
face towards the printer.
IMPORTANT:
• Never use envelopes with windows, or coated linings. These lead to paper jams and can cause damage to the printer.
NOTE:
• Up to 5 envelopes can be loaded in the standard 150 sheet tray.
• If you do not load envelopes in the standard 150 sheet tray right after they have been removed from the packaging, they may
bulge. To avoid jams, flatten the envelopes before loading them in the standard 150 sheet tray. When flattening the envelopes,
firmly press down on the entire surface of the envelopes as shown below.
Feed direction
Printing Basics 99