Using The Id Card Copy - Fuji Xerox DocuPrint CM115 w User Manual

Using the ID Card Copy

NOTE:
• If the Service Lock setting for COPY is set to Password Locked or Color Pass. Locked, you need to enter the four digit
passcode to use the ID Card Copy function. If the Service Lock setting for COPY is set to Locked, the ID Card Copy function
is disabled. For details, see "Service Lock" on page 177.
You can copy both sides of an ID card on one side of a single sheet of paper in its original size by pressing the
(ID Card Copy) button on the operator panel. This feature helps to show both sides of an ID card in one page in its
original size.
To make a copy:
1
Place an ID card facing down on the document glass and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 121
2
Press the (ID Card Copy) button.
3
If you want to customize the copy settings, wait for five seconds until the display is automatically changed.
Specify the copy settings you want before pressing the
See also:
• "Setting Copy Options" on page 122
4
Press the (Start) button to start copying.
After the front side of the ID card is scanned, the display prompts you to turn over the card.
To scan the back side of the ID card, turn the ID card over and select OK(Scan) or press the
a
button.
To finish copying, select Cancel(Print).
b
NOTE:
• Color copy is secured with a password if the Service Lock setting for COPY is set to Color Pass. Locked. If you are
making a color copy and the Service Lock setting for COPY to Color Pass. Locked, you will need to enter the four
digit password after pressing the
(Start) button.
(Start) button.
(Start)
Copying 131