Redial A Number; Use H.323 Protocol To Place Audio Calls - Polycom VVX 300 User Manual

Polycom VVX Business Media Phones User Guide
You can also place an intercom call during a call.
To use the intercom during a call:
1 Select Hold, and select the Intercom soft key.
The active call is placed on hold and the New Call screen displays.
2 Enter a number or select a contact.
3 Select Dial, or on VVX 500 and 600 phones, tap
4 After the call is answered, speak your message and select End Call.
5 Select Resume.
If your phone is set up to answer intercom calls with your microphone muted, you need to unmute your
microphone before responding to the call.
To respond to an intercom call with mute enabled:
» After the call is answered, press the Mute key and reply.
Place a Call from a VVX Expansion Module
You can place a call using the line keys on your VVX Expansion Modules. Line keys on expansion
modules activate available lines and place calls to contacts assigned to those lines. See the section
Connect Polycom VVX Expansion Modules to Your Phone
modules.
To place a call:
» Do one of the following:

Press a line key corresponding to an available line and dial the number.

Press the line key of the assigned favorite you want to call.
The call is placed and displays on your phone's screen.

Redial a Number

The last call you placed displays on your phone in the Dialer. The first number in the list is the last call
you placed.
To redial a number:
1 Select New Call.
2 From the Dialer, select the first number in the list.
3 Select Dial, or on VVX 500 and 600 phones, tap

Use H.323 Protocol to Place Audio Calls

You can use H.323 Protocol to place calls on VVX 500, 600, and 1500 phones. Your system
administrator can set up your phone to handle calls that use the SIP protocol, the H.323 protocol, or both.
Polycom, Inc.
.
for more information on using expansion
.
UC Software 5.2.0
39