Polycom VVX-300 Quick Start Manual

Barracuda Phone System
Polycom VVX-300/310 VoIP Phone Quick Start
Guide
This article explains the basic operation of the Polycom VVX-300 and -310 VoIP phones.
Soft Keys
The four buttons immediately below the LCD display are soft keys.
Each soft key performs the action displayed immediately above it.
Soft key behavior is context sensitive – the associated soft key action changes according to current
phone state.
Place a Call
Enter the desired internal extension or external number.
Lift the receiver or press the speakerphone button to call.
Voicemail Access
To access voicemail messages, press the
Depending on your system configuration, you may be asked for your voicemail passcode.
Last Number Redial
Press the right arrow key to bring up the Placed Calls list.
Use up/down arrow keys to select number to redial.
Press the Dial soft key.
Call Hold
To place a call on hold, press the
To resume the call, press the Resume soft key.
Call Transfer
Attended Transfer
To transfer a call, press the
Dial the destination number, then press Dial.
When the destination party answers, announce the caller, and press Transfer again to complete the
transfer.
Polycom VVX-300/310 VoIP Phone Quick Start Guide
1 / 3
(Messages) key to the left of the keypad.
(Hold) key.
(Transfer) key.