Reset System; Restore System - Juniper Allegro CE Owner's Manual

▲ ▲ ▲ ▲ ▲

Reset System

Reset System will cause all running applications to close
unexpectedly and data may be lost. It then reloads all drivers and
programs that run at start-up time. A reset leaves all RAM intact.
Installation programs often request a reset so that the changes the
program made to the registry can be honored by system components
as they reload. A reset is also useful when applications misbehave
and render the system unusable.
You can execute a reset by selecting Start|Programs|Utilities|Reset
System, or by holding down the On/Off key for more than eight
seconds.
▲ ▲ ▲ ▲ ▲

Restore System

Restore System erases RAM, including all running programs and
settings, and reloads the operating system.. When the operating
system reloads, it will automatically restore the Saved System Backup
from the C_Drive.
Make sure you save all valuable data to the internal non-volatile
storage before executing this menu option. You can execute a Restore
System by selecting Start|Programs|Utilities|Restore System. You will
receive the following Warning screen, explaining to you what will
happen if you proceed with this function, with the option of
completing or canceled process.
Windows CE Page 4-109