Suspend, Reset, Power Off, And Restore Defaults - Juniper Archer 3 Owner's Manual

Wi-Fi Wireless Networking
The Acher 3 has built-in Wi-Fi wireless networking to connect
to the internet or an office network.
Connecting to a Wi-Fi Network
To use Wi-Fi, you need to be in range of a Wi-Fi access point
to make a connection. To set up Wi-Fi, follow these steps:
1. Go to Settings > Wi-Fi and tap Off in the upper left
hand corner to toggle it on. You can also pull down the
Quick Settings Tray and tap the Wi-Fi symbol to turn it
on. Tap the word Wi-Fi underneath the symbol. A list of
discoverable devices is shown. Tap MORE SETTINGS to
go to the settings screen.
2. The Acher 3 automatically starts scanning the area
for available Wi-Fi networks. A list is shown. Select
the network you want to use and enter the network
password (for locked networks). The Allegro 3
remembers the Wi-Fi network connections created.
3. Wi-Fi can be turned off and on and settings can be
managed from Settings > Wi-Fi screen. Tap the network
you selected to view information like Link speed. Tap
and hold to view other options like Modify network.
Note: Android does not support shared key WEP.

Suspend, Reset, Power Off, and Restore Defaults

Use the power button
restore the Archer 3 to its factory state. To access the Power
Button menu, press and hold the power button.
to suspend, reset, power off, or
Chapter 2 Standard Features
15