Transferring Files - Juniper Allegro CE Owner's Manual

❖ Note: This restriction depends on the time it takes for the connection,
synchronization, and disconnect process. If the process takes only five
minutes, the number of Allegros you can connect to the desktop PC is greatly
increased. But the maximum number of USB devices you can connect to a
desktop PC through USB hubs are 127 units.
▲ ▲ ▲ ▲ ▲
Transferring Files Between the Allegro CE and the
Desktop PC
Once the Allegro and the desktop PC are communicating, files can be
transferred between the two computers. On the desktop PC, use My
Computer, Windows Explorer, or another file management program to
view and navigate through the contents of the desktop PC. On the
Allegro double-tap on the My Computer icon to view and navigate
through the folders and stored files. Use the drag and drop, cut, copy,
and paste functions to move files between the Allegro and the desktop
PC. On the Allegro, we recommend that you use the internal non-
volatile storage, C_Drive, as the primary storage area. Refer to the
Storing Files and Programs section later in this chapter for details.
File Conversion
When transferring files between the Allegro and the desktop PC, file
conversion may be necessary. From the ActiveSync program on the
desktop PC you can set up the file conversion options up as desired.
Complete the following steps:
1) Select Tools|Options.
Windows CE Page 4-99