Bar Code Expansion Pod - Juniper Allegro CE Owner's Manual

Bar Code Expansion Pod

Using the bar code expansion pod with an Allegro offers the
convenience of scanning bar codes and receiving the scanned data,
all in a single handheld unit. With the Bar Code Expansion Pod there
are no extra cables that could get in the way of your scanning beam.
The bar code pod is factory installed to the Allegro and includes the
COM port connection, the power supply, and the software. The
software sets up and enables the scanner to scan, and to transfer the
scanned data to a data collection program.
The bar code expansion pod
integrates the laser bar code
scanning technology of a
Symbol SE 1224 high-
performance laser scan engine
with the Allegro CE and offers
the following features:
• High performance bar code scanning in bright, outdoor light
• Scanning distances of 1 to 3 feet from the Allegro
• Excellent scan capability for poorly printed or low contrast bar
codes
• Low power performance
• Compatible with nine different bar code symbologies
▲ ▲ ▲ ▲ ▲
Bar Code Reader Program
The bar code expansion pod is shipped with a Bar Code Reader
program factory installed on your Allegro. This program has two key
functions.
The first allows you set up the scanner,s target/scan button control,
scan notification, styles of bar codes to scan, etc.
The second function of the Bar Code Reader program is to scan a
variety of bar codes with the press of a button. This function also
takes the scanned bar code and transfers it into electronic data that is
automatically entered into a data collection program opened on your
Allegro.
Expansion Pods Page 8-11