Usb Multisync - Juniper Allegro CE Owner's Manual

▲ ▲ ▲ ▲ ▲

USB MultiSync

USB MultiSync is an Allegro feature that allows multiple Allegros to
communicate with a single desktop PC through the USB/Power Dock
and ActiveSync. The purpose for MultiSync is to allow users of
multiple Allegros to automate data retrieval.
❖ Note: MultiSync only works with the Windows 2000 operating system
(at the time). Single unit USB connections work in all Windows operations
systems.
With MultiSync, after collecting data on multiple Allegros, they are
each placed in a USB/Power Dock. MultiSync commands each
Allegro to connect to the desktop PC, through ActiveSync. When one
Allegro connects to the desktop PC ActiveSync synchronizes files.
Without MultiSync, users with Multiple Allegros, would have to
manually place each Allegro, one by one, into one USB/Power Dock
to connect to the desktop PC.
Accessing MultiSync Settings
To access the MultiSync settings complete the following steps:
1) Plug the USB cable into the Power Dock and desktop PC.
2) The USB is the default port and should already be selected. To
double check, tap the Start button and select Settings|Control
Panel|Communications Properties. Tap the PC Connection tab.
Windows CE Page 4-91