Usb Connection; Usb Communication - Juniper Allegro CE Owner's Manual

▲ ▲ ▲ ▲ ▲

USB Communication

The USB/Power Dock also serves as a USB connection from the
Allegro to the desktop PC. The red LED indicator lights up when the
USB connection between the Power Dock and desktop PC is active.
The connection and communication between the desktop PC and the
Allegro is achieved through ActiveSync. The USB port is used for
connecting both single or multiple units.
USB/Power Dock Connector Pins
The interaction between the Power Dock and Allegro happens
through the connection of the six connectors on the bottom of the
Allegro. There are six pins in the Power Dock that touch the Allegro
connectors as the Allegro is placed into the Power Dock. The six pins
can be replaced if damaged or bent.
▲ ▲ ▲ ▲ ▲

USB Connection

To establish a connection between the Allegro and desktop PC follow
the directions in Chapter 4 in the section entitled, Establishing a
Connection Using ActiveSync.
Once you have set up and successfully connected to ActiveSync for
the first time, you only need to place the Allegro into the Power Dock
and it will automatically begin the ActiveSync connection sequence.
Hardware Features Page 2-37