Control Panel; Windows Ce 3.0 Control Panel; On-Line Help - Juniper Allegro CE Owner's Manual

▲

On-line Help

For on-line help with Windows CE basics or with a specific
application, tap the Start button and select Help. Select a topic from
the Help Contents list. You can also tap the [?] button from within an
application to obtain program specific or Windows CE help.
▲ ▲ ▲ ▲ ▲

Control Panel

The Control Panel consists of a group of windows called applets that
control the different aspects of Windows CE operating system. Each
applet has settings you can change, allowing you to customize your
Allegro.
The Allegro can use either the Windows CE 3.0 or CE .NET operating
system. There are notable changes in some of the Control Panel
applets, both Control Panels are included in this manual. The
Windows CE 3.0 Control Panel section is described first.
▲ ▲ ▲ ▲ ▲

Windows CE 3.0 Control Panel

To open the Control Panel, tap the Start button and select
Settings|Control Panel. A Control Panel screen, similar to the one
shown below, appears. Double-tap on the application you want to
view.
❖ Note: You must press the OK button when settings in a Control Panel
applet are changed in order for the settings to be saved. Once the Control
Panel applets are set up the way you want, run the Save System utility to
save all settings (described later in this chapter of the manual).
Page 4-10 Windows CE