Juniper Allegro CE Owner's Manual page 99

6. Tap on OK to return to the Storage Properties applet.
After formatting your PC card, it remains inaccessible until a
partition is made.
7. Tap on New in the Partitions section of the Storage Properties applet
to create a new partition. The partition is the accessable part of the
PC card.
8. Enter the name of the new partition on the PC card and tap on OK
to save. Tapping on the X cancels out of naming the partition and
returns to the Storage Properties applet screen.
Once a partition is created and saved, your PC card is accessible and
ready to use.
If you do format your C_Drive, you must reload your operating
system to get your Allegro to working again. To install your .NET
operating system, complete the following steps:
1. Open the CD-ROM drive on your PC.
2. Place your Allegro CE .NET Utilities CD into your PC's CD-ROM
drive.
3. Close your PC's CD-ROM drive and wait for a pop-up to appear
on your PC's screen.
4. Follow the CE .NET install instructions on the pop-up window.
Windows CE Page 4-39