Suspend, Reset, Power Off, And Restore Defaults - Juniper Allegro 2 Owner's Manual

A calculator is available from the numeric screen. Press
„
the Calc key to launch the calculator application.
The backspace and the space keys can be repeated by
„
pressing and holding those keys.

Suspend, Reset, Power Off, and Restore Defaults

Use the power key
the Allegro 2 to its factory state. To access the Power Key
menu, press and hold the power key.
Suspending and Resuming the Allegro 2
We recommend you suspend your handheld when it is not
in use for a day or two.
Suspending the handheld is different from powering it off.
When the device is suspended it goes into a low power
mode. Some battery power is used during suspend.
1. Press and release the power key
option on the Power Key menu. The backlight shuts off. It
can take several seconds to fully suspend. When the cell
modem is on, in can take up to 45 seconds.
2. The green LED turns on during the suspend process and
goes off once it is completely suspended to let you
know it has finished suspending.
3. To resume the device from suspend mode, press and
release the power key again. When it is resumed,
the handheld resumes where it was before it was
suspended.
to suspend, reset, power off, or restore
Chapter 3 Programs and Settings
or select the Suspend
39