Gps Installation Program - Juniper Allegro CE Owner's Manual

▲ ▲ ▲ ▲ ▲

GPS Installation Program

The GPS Set Up program is installed on your Allegro before it is
shipped. In the event that the GPS program gets removed from your
Allegro and needs to be reinstalled, complete the following steps:
1. Insert the Allegro CE Utilities CD, this is shipped with your
Allegro, into your PC's CD-ROM drive and wait for the
installation screen to load.
2. Click on the Browse CD button on the installation screen.
3. Double-click on the Utilities Applications folder.
4. Double-click on the GPS Pod Setup Install folder.
5. Connect the Allegro to your PC through ActiveSync.
6. Double-click on the setup icon.
7. Follow the instructions given throughout the installation
program.
Page 8-10 Expansion Pods