Displaying Information About The Pc Card - Juniper Allegro CE Owner's Manual

4) PC cards have a 68 pin socket on one end. Insert the card socket-
first. The front of the card should be facing the door.
❖ Important Note: Be careful when inserting and removing cards. Excess
force could damage the card and the card drive. If the system tray indicator
for the PC card activity is on, the computer is writing to the card. Do not
turn off the Allegro and remove the card until the indicator stops blinking.
Incomplete files can corrupt the data already stored on the card.
5) To remove a card, push the eject button, grasp the card firmly, and
pull it out.
6) Close the door to the PC card slot. Turn both screws clockwise l/4
of a turn to seal the compartment. (Because of the wide slits in the
screws you can use coins or even keys to turn the screws.)
▲ ▲ ▲ ▲ ▲

Displaying Information About the PC Card

You can display information about the installed PC card such as the
card type and the name of the manufacturer. In Windows CE, go to
Control Panel|System Properties|General to view this information.
Page 2-40 Hardware Features