System Save/Restore Utilities; Save System - Juniper Allegro CE Owner's Manual

System Save/Restore Utilities

The Utilities Menu has multiple restart/save system options designed
for the Allegro. The following are the restart/save options available to
you:
▲ ▲ ▲ ▲ ▲

Save System

The Save System option creates a copy of RAM and saves it to a
location on the C_Drive. This saved image of RAM is used when a
Restore System is either executed by the menu selection, or when the
operating system is loaded and an automatic restore is performed. It
is located at Start|Programs|Utilities|Save System.
When Save System utility is selected, the following message is shown:
Page 4-108 Windows CE