Juniper Allegro CE Owner's Manual page 271

To open the client utility, complete the following:
1. Tap on the Aironet Client Utility icon on your Allegro's desktop.
The following screen appears:
You will notice that the screens are formatted for a screen that is
wider than your Allegro's screen. To view all options on a screen,
drag the Aironet Client Utility to the left or right, as needed. To perform
this drag function, place the stylus on the Allegro screen in the Aironet
Client Utility title bar. While holding the stylus down, slide it left or
right to move the program on the screen.
The Aironet Client Utility has the following five options:
Profiles
Firmware
Status
Statistics
Survey
For instructions on using the Aironet Client Utility and any of the
above options, use the Cisco Aironet Wireless LAN Client Adapters
Installation and Configuration Guide for Windows CE. The guide's
location is described below.
Expansion Pods Page 8-33