Juniper Allegro CE Owner's Manual page 203

3) The Mail Service Definition dialog is displayed. If you are using a
dial-up connection, select the connection that you created earlier
(see previously) from the drop-down list. If you are using a
network connection, select Network Connection. Enter your ISP or
network information in the remaining edit boxes.
4) Tap the Next button to access the Mail General Preferences and
Mail Inbox Preferences dialog boxes. Configure the settings in
these dialogs according to your needs. For additional information
on these settings consult the on-line help. When you are finished,
tap the Finish button.
5) You can establish a connection using Inbox by tapping
Sevices|Connect from the main menu.
To send an e-mail, tap Compose|New Message. Enter the address,
subject, and message and tap the Send button on the toolbar. To read
your incoming e-mail, tap Inbox in the tree view at the left of the
screen. This displays a list of your messages in the list view on the
right. Double-tap a message in this list to view its content.
Help
Use the on-line Help [?] for more details about the Internet Explorer
and Inbox programs.
Windows CE Page 4-143